Takara Belmont ZEN MIRROR, Инструкция по установке/эксплуатации

Страница: 11 / 16

11
＜ How to install hairdryer holder ＞
①Insert the hairdryer holder all the way into the
frame.
②Attach the prepared sets of a screw and nuts to
the frame as shown in Figure 1. (2 sets for each
dryer holder )
③Adjust the end of screw reaching the concave
surface of the dryer holder as shown in Fig. 2. Then
adjust nuts stick to each other .
When the position is decided at both places, hold
the screw with the (+) Phillips screwdriver and
fully tighten the nut with 8mm Spanner.
④Confirm the dryer holder is attached firmly.
If there is lack of firmness, repeat process ③ again
and tighten securely.
※In case of double-sided free-standing , attach the
other dryer holder in the same way.
Fig. 2
①
②
frame
dryer holder
set of a screw and nuts
concave surface of the dryer holder
M5 hex nut
M5×20 pan head screw
Fig. 1
□Confirm that there is no rattling of the product
Push the product gently to check if the installation of the product is unstable or if there is any movement.
⇒If it seems unstable or there is a lot of movement, check the screws of the mounted parts once again.
□Check the appearance part for damage such as scratches
Check the following items.
■ After installation