●
Remove and clean any dirt trapped within the sprinkling filter unit
.
Sprinkling filter unit
Shower head main unit
Gasket
Foaming water outlet
O-ring
After the hot water becomes clear during the water flow test, always clean the sprinkling filter unit.
Failure to do so can result in insufficient flow rate.
Cleaning
3
Test water flow
Caution
Always test the water flow to prevent
accidents during use.
* Test the water flow and inspect the following
items. The hot water may be slightly tainted
at the start of the water flow test,however this
does not indicate any problem.
9
(1) Is there no water leaking from the pipe joints?
The pipe joints may come loose during transportation,
so check the joints within the bowl thoroughly.
(2) Are the hot water supply and water supply pressures
at the same, stable pressure?
(3) Can temperature be controlled properly?
(4) Check that the shower outlet flow is sufficient.
