Takara Belmont Salon Console, Руководство по эксплуатации

Страница: 25 / 28

□Does the basin
rattle?
□Slowly push the front end of the
basin, in each direction and
check whether they rattle.
□Rattle may cause incorrect operation or damage
of the main body, or cause it to fall over. Stop
using the product.
25
Inspection item Inspection method If the inspection results show defects
■Always inspect the product after work every day
Inspection item Inspection method If the inspection results show defects
Inspection item Inspection method If the inspection results show defects
□Is there any water
scale or dirt blocking
the spray nozzle?
□Remove the spray nozzle from the
shower head and check that there
is no water scale or dirt on it (see
page 25).
□Use an item such as a toothbrush to remove any
dirt such as water scale and clean the spray
nozzle. Leaving the spray nozzle uncleaned will
lead to blockage and water may not be output
from the shower head properly.
□Is there are any water
scale or dirt blocking
the spray nozzle?
□Remove the spray nozzle from
the shower head and check that
there is no water scale or dirt on
it (see page 25).
□Use an item such as a toothbrush to remove any
dirt such as water scale and clean the spray
nozzle. Leaving the spray nozzle uncleaned will
lead to blockage, and the water may not be
output from the shower head properly.
■Inspect the product once per week
□Check that there are no scratch,
cracks, or peeling on the plated
surface of the tap and the knobs.
□Check that there is no holded or
uncomfortable feeling when you
use and clean them.
□It may cause injured. It is necessary to
change them.
□Is there peeling
plate on the tap or
temperature control
knob?
□Is the drain blocked? □Remove the objects that block the drain. If the
drain is blocked, the water is turned on
accidentally or a slight trickle of the water due to
an increase in water pressure at night may cause
the water to spill from the basin, leading to water
leakage.
□Check that the drain is not blocked
with the drain cap, towel or
shampoo cloth.
□Has the tap been
turned firmly?
□Turn the tap off completely (In the case of double
tap type, in a clockwise direction ) and turn the
water off properly.
If the water does not turn off completely, there
may be a malfunctions in the water regulator.
Close the stop valves in the water supply and hot
water supply (see page 26,27), and stop using the
product immediately.
□Turn the tap off completely (In the
case of double tap type, in a
clockwise direction )and check
that the water turns off properly.
□Is there any water
leakage inside the
basin body.
□Wipe off the water. Leaving it as it is may cause
rotted and strange smell.
□Take the basin box and the
maintenance door off and check
that there is the water on the inner
panel in the basin body or inside
of maintenance door.
□Is there any water
leakage inside the
basin body.
□If there is the water leakage from the pipes,
pipes and packing may be worn away or
depleted or damaged. Stop using product
immediately.
□Take the maintenance door off and
check that there is no water
leakage from the pipes and the
water regulator.