Takara Belmont MAJOLICA PORTO AY-SB P1, Руководство по установке

Страница: 11 / 28

11
■
Attach the water regulator
1. Remove the packing (white, 1pc) and nut from
the water regulator.
٭Do not remove the packing (black).
2. Attach the packing(black, 2pcs) on to the water
regulator, and insert it into the water regulator hole
in the basin.
3. Put the packing(white, 1pc) back to the water
regulator, and fix it onto the basin by tightening the nut.
٭The packing(black, 2pcs) are included in the basin
assembly set.
1
Basin mounting
surface for the wall
Attach the centre of the water
regulator vertically to the basin
mounting surface for the wall
Drain
Basin mounting
surface for the wall
Water regulator
Basin
٭Shorter tube
face drain hole
Basin for single tap
Packing(white)
Nut
Basin
Water regulator hole
Packing(black), 3
Water regulator
Water regulator
Water regulator packing(black)
Packing (black)
Packing (white)
Nut
Caution
•Pay attention to the direction of water regulator and the order you attach the packing.
If it is done incorrectly, it may result in a water leak or affect the connectivity of other parts.
•Make sure to insert the water regulator into the correct hole in the basin(Double tap type).
<Single tap type / Double tap type>
Water regulator