Takara Belmont Luxury MAXIM AB-9500P, Руководство по эксплуатации

Страница: 20 / 32

How to Use
18
Cancel Function
Before using the auto-return function, make sure that no persons or animals are
under the legrest or step or in the support arm area, and operate it safely.
Auto-return switch
Base Operation Section Control panel
Left Right
Right Left
P2
HE
ATER
SEAT
P2
SEA
T
Roll-up type
9500P
Full-flat type
9500E
You can use the switch on either the left or
right control panel to stop operation.
Pressing any of the switches shaded in gray will stop the operation.
<Changing Settings of the Auto-return Function>
2. Using the auto-return function
Press the auto-return switch on the control panel (right or left).
The chair height, backrest angle, legrest position, and seat position return to their original positions
automatically.
WARNING
The position set by the auto-return switch is already configured when the chair is shipped from the
factory. The seat tilting position, on the other hand, can be set according to the customer's
preferences either to the neutral or relaxation position. When the chair is shipped from the factory,
the seat tilting position is set to neutral.
Perform the following procedures to change the preset positions.
(1) Change the seat tilting position to either the neutral or relaxation position.
(2) Press and hold the auto-return switch for approximately three seconds until you hear an
electronic beep indicating that the position is set.
(3) Setting is completed when the electronic beep is emitted. Use the seat operation switch to raise
the seat, and then use the auto-return switch to confirm that the position has been set correctly.
Press any switch other than the vibration switch if you want to stop chair operation midway when
using the preset or auto-return switches. The cancel function operates to stop chair operation.