Takara Belmont BRAMU Скачать руководство пользователя страница 7

Safety Precautions (Must be Obeyed)

Use and Cleaning Precautions

Use and Cleaning Precautions

7

WARNING

CAUTION

●Turn off the power switch and unplug the power plug before cleaning.

Failure to do so can result in electric shock or fire. Also, sudden movement of the chair 

while cleaning can result in injury.

●Procedures if a power outage occurs

•Turn off the power switch and remove the power plug of this product from the outlet in 

order to prevent unexpected operation when recovering from a power outage. Also turn 

off the power switches of all devices connected to the service outlet and remove the 

power plugs of devices.

•Be extremely careful if there is a power outage when the seat is in a high position as it is 

not possible to lower the chair. Assist the customer in getting in and out of the chair in that 

position, being very careful that the customer is not injured and the chair does not tip over.

●Do not allow any person whose weight exceeds 135 kg to sit in the chair.

Doing so can cause the chair to tip over or faulty operation.

●Do not strongly strike or scrape the chair.

Doing so can result in tearing of covers and similar damage, and faulty operation.

●Before use, confirm that every part is working normally and safely.

Be constantly careful of and inspect for looseness, rattling, tilting, vibration, noise, 

temperature, odors and other possible problems. If you feel that something seems 

slightly different or not normal, immediately stop using the chair, turn off the power and 

unplug the power plug, and contact your closest dealer or Takara Belmont.

●Always be sure to use your hands to operate the switches.

Always be sure to use your hands to operate the switches except for the foot-operated 

UP/DOWN and rotation lock switches. Operating with something other than your hands 

can result in damage or faulty operation.

●Be extremely careful not to mistake the switches when operating.

The person operating the chair must pay careful attention to the surrounding area, give 

verbal warning, and properly operate the chair.

●Precautions when using the headrest

•Be careful in pulling up the headrest more than necessary because doing so will make 

the headrest to come off the chair.

•Be careful not to get water or any chemical on the headrest bar. Wipe off all water and 

chemicals immediately if any gets on these parts. Failure to do so can prevent the 

headrest from being securely fixed because of corrosion or degradation of friction force 

due to rust.

•Be careful when operating the headrest that fingers and other body parts are not 

pinched between the area around the operating lever or in between the headrest and 

backrest.

●Precautions when using the cape holder

•Be sure to always return it to the stored state when not in use.

•When storing the cape holder, be careful not to pinch the customer's or your own 

fingers between it and the armrest.

•The cape holder can withstand a load of 10 N (1 kgf/2.2 lbf). Using the cape holder 

with an excessive load can result in damage or injury.

Содержание BRAMU





































Отзывы: