Takara Belmont AY-CU-SX1, Руководство по эксплуатации

Страница: 15 / 28

Caution
Never use volatile chemicals such as thinners, alcohol, gasoline or kerosene, cleaning products
such as wax with a scourer, a sponge with a scourer, detergents that include organic solvents,
acidic, alkaline or chlorine-based detergents, or scouring pads. Failure to follow this instruction
may cause scratches or discoloration.
15
Maintenance
■Basin, Inner panel, Operation panel, Bottle holder
Basin,inner panel,operation panel,bottle holder is made of resin. Leaving shampoo,treatment and water
get them stained or slimed.
Keep them clean regularly.
Caution
1.
Clean them with the water and remove stain and slime by soft towels.
2.
If they are extremely dirty, wipe with a 10% detergent solution diluted with the water.
● Don’t use a wire wool or sandpaper or metallic scourer. Failure to follow this instruction may
cause scratches.
● If there are some damages or cracks,stop using it immediately.
< How to care >
■Hair catcher.
Hair catcher is for preventing form flowing any haire and dirty into drain pipe during shampoo.
You need to clean it regulary.
Caution
●Clean the hair catcher as regularly as possible. Continuing to use the hair catcher without
cleaning may cause the drain to be cloged with hair, leading to water overflowing and
unhygienic conditions. Clean the hair catcher after each shampoo.
●The hair catcher is a consumable supply. Replace it if it is extremely dirty or the surface has
deteriorated. (available at an additional cost)
<How to care>
Hair catcher
Drain cap
1
Pull the basin open.
2
Pull out the drain cap.
3
Pull out the hair catcher and then clean and
remove any hairs and dirty.