Takara Belmont AY-CU-SX1, Руководство по эксплуатации

Страница: 14 / 28

1. After shampooing is completed, guide the customer
get up and return the chair to initial position.
2. Hold the handlebar and pull basin box close.
3. Wipe off the water or chemical on the outside surface,
the counter and the door. In particular, wipe off
color chemical immediately.
Caution
●After use, wipe off the water on all parts except the basin. Leaving it as it is may cause damage
to the main body, make dirt and it is difficult to remove.
●Do NOT hold the handlebar from the top. Your hand may hit the counter when you pull the
basin box close.
■ After shampooing
(The picture below is double tap type)
Basin
Handlebar
14
Guide the customer lean forward for the basin. Adjust the height
of chair as necessary.
Get the customer’s hair washed with the hairdresser standing
beside basin.
Guiding Customers
Warning
Check the operation manual of the chair about how
to use it.
Warning
Warning
Make sure that the customer doesn’t hit basin on their
chest or knee when you guide custome to lean.
Make sure that the customer doesn’t hit the basin
forcedly.
■When shampooing
(The picture below is double tap type)
1. Guide customer to sit on the chair.
2. Put a shampoo cloth on customer.
3-1. Guide the customer lean forward.
3-2. Shampoo the customerʼs hair.
Recommendation: shampoo cloth without dropper
3. Open the basin box. ( See the "How to Use" on page 10)
Hold the handlebar and pull it open.