5
Positioning Decal
Caution
Assembly Instructions
1. Attaching the Base Stand
Remove the main unit body (AK-200) and place it on the packing case,
positioning it as shown in the illustration on the right.
*Use the two handles (depressions) on the
side to pick up the main unit.
Main Unit
Support Cap
Support
Base Stand Flange A
Base Stand
Bolt
Tool Accessory
Base Support Flange B
Handle
Use the following procedure to fix the Base Stand (AY-200) in position with the bolt and tool.
1) Attach the accompanying Support
Cap in the direction shown in the
illustration.
Main Unit Hood Side
Depression
Depression
Cutout
Support Cap
2) Use the positioning decal to confirm the attachment
position of Base Stand Flange A and the Base Stand.
Base Stand
Flange A
Cutout
Convex Part
Positioning Decal
Base Support
Flange B
Washer
Spring Washer
Bolt
Tool Accessory
3) Line up the ìCutoutî and the ìConvex Partî
and tighten the bolt.
Exercise caution so that the bottom of
the Support does not scratch Base Stand
Flange A.
4) Press the Support Cap downwards.
