23
These are not malfunctions
■
Backrest reclining prevented
■
Preset/auto-return functions disabled
Before Requesting Repair
□
Check that the chair
operates normally.
Daily Inspection Procedures
Inspection Item
Inspection Procedures
Recovery Procedures if there is a Problem
Perform the following inspection procedures in order to ensure that the chair can be used safely.
• Daily Inspection Procedures
■
When the child seat is raised, the backrest is only able to recline a
small amount (approx. 10°) to prevent accidents such as falling over
or dropping. Before reclining the backrest, please lower the child
seat to its lowest position.
■
When the child seat is raised, the preset and auto-return functions
are disabled to prevent accidents such as falling over or dropping.
Before using the preset and auto-return functions, please lower the
child seat to its lowest position.
If any of the problems described above are inspected and the chair does not work normally even after performing
the recovery procedures, immediately stop using the chair, turn off the power, unplug the power plug, and contact
your closest dealer or Takara Belmont.
□
Turn on the power switch, and
check that a double beep with
one to two pauses are not
emitted intermittently.
□
Check that the chair moves
normally to the preset positions
by using the preset switches.
□
Check that the chair moves
normally to the initial position
(position for getting in or out of
the chair) by using the
auto-return switch.
□
Check that the chair raises and
lowers by using the UP/DOWN
switches and foot switches of
the chair.
□
Turn off the power switch, and wait
approximately five seconds before turning
on the power switch again. If the alarm still
sounds, the position detector might be
faulty. Stop using the chair, turn off the
power, unplug the power plug, and contact
your closest dealer or Takara Belmont.
□
Perform the procedures indicated in "1
Using the Preset Function" under "How to
Use" (p. 19). If operation is still not normal,
it might not be possible to safely use the
chair. Stop using the chair, turn off the
power, unplug the power plug, and contact
your closest dealer or Takara Belmont.
□
Perform the procedures indicated in "2
Using the Auto-return Function" under
"How to Use" (p. 20). If operation is still not
normal, it might not be possible to safely
use the chair. Stop using the chair, turn off
the power, unplug the power plug, and
contact your closest dealer or Takara
Belmont.
□
Perform the procedures indicated in "(2)
Raising/Lowering the Chair" under "How to
Use" (p. 14). If operation is still not normal,
it might not be possible to safely use the
chair. Stop using the chair, turn off the
power, unplug the power plug, and contact
your closest dealer or Takara Belmont.
Daily Inspection Procedures
24
Inspection Item
Inspection Procedures
Recovery Procedures if there is a Problem
□
Check that the chair backrest
can be reclined and raised by
using the backrest switch.
□
Check that the chair legrest
can be raised and lowered by
using the backrest switch.
(AB-HPPXN)
□
Check that chair rotation can
be locked and unlocked by
using the rotation lock switch.
□
Confirm that the child seat is
able to be operated via the
child seat up/down switches.
□
Check that there is no
wobbling or abnormal noise
when operating the chair.
□
Check that the chair stops at
the desired position for a fixed
period and does not sink.
□
Check that no abnormal odors
or smoke is being emitted from
the chair.
□
Check that no oil has dripped
on the top of the base or oil is
not seeping from the pump
cover.
□
Check that the chair
operates normally.
□
Check that the chair
operates normally.
□
Check that there are no
abnormal odors emitted
from the chair.
□
Check that no oil is
leaking.
□
Perform the procedures indicated in "2
Reclining the Backrest" and "3 Raising the
Backrest" under "How to Use" (p. 16).
If operation is still not normal, it might not
be possible to safely use the chair. Stop
using the chair, turn off the power, unplug
the power plug, and contact your closest
dealer or Takara Belmont.
□
Perform the procedures indicated in "2
Reclining the Backrest" and "3 Raising the
Backrest" under "How to Use" (p. 16).
If operation is still not normal, it might not
be possible to safely use the chair. Stop
using the chair, turn off the power, unplug
the power plug, and contact your closest
dealer or Takara Belmont.
□
Perform the procedures indicated in "(1)
Guiding Customers" under "How to Use"
(p. 12). If operation is still not normal, it
might not be possible to safely use the
chair. Stop using the chair, turn off the
power, unplug the power plug, and contact
your closest dealer or Takara Belmont.
□
Perform the procedures indicated in "4
Using the Child Seat Function" under "How
to Use" (P.17). If operation is still not normal,
it might not be possible to safely use the
chair. Stop using the chair, turn off the
power, unplug the power plug, and contact
your closest dealer or Takara Belmont.
□
If there is any wobbling or abnormal noise
when operating the chair, stop using the
chair, turn off the power, unplug the
power plug, and contact your closest
dealer or Takara Belmont.
□
If the chair does not stop for a fixed period
and sinks, stop using the chair, turn off the
power, unplug the power plug, and contact
your closest dealer or Takara Belmont.
□
Using the chair in such condition can
result in abnormal operation or fire.
Stop using the chair, turn off the power,
unplug the power plug, and contact your
closest dealer or Takara Belmont to inform
of the abnormal situation.
□
Oil might be leaking from hydraulic parts.
Stop using the chair, turn off the power,
unplug the power plug, and contact your
closest dealer or Takara Belmont.
