The power switch is located at the base.
Press the side with the mark to turn the power on.
Press the side with the
◎
mark to turn the power off.
OFF (
◎
mark)
<Power switch>
ON ( mark)
Preparation
11
2. Turn on the power.
Power switch
■
Power Supply
1. Insert the power plug into the outlet.
CAUTION
WARNING
Power plug
Power cord
Ground
WARNING
•
B
e sure to use a 120-V AC (7 A or
more)* outlet for the power supply. Do
not share use of the outlet with any other
electrical device.
•
B
e sure to fully insert the power plug
into the outlet until reaching the base of
the plug. Do not pull the cord to remove
the power plug from the outlet. Hold by
the power plug when removing.
•
D
o not connect the earth (ground) to the
following objects.
•
G
as or water pipes, lightning rods and
telephone dedicated grounding wire.
•
W
iring work must be performed by
certified personnel. Consult an electrician
for wiring work.
•
P
ower cord replacement must be
performed by the manufacturer or its
distributors, or by a technician with
equivalent certification.
* 110, 220, 230, 240 V AC (7 A or more)
The chair must absolutely be grounded in
order to prevent electric shock.
⇒
When the power is turned on with the chair rotation lock released,
the chair rotation gets locked automatically.
A
lways be sure to remove the plug from
the outlet when the chair will not be used
for an extended period such as at the end
of the day, on holidays, and other times.
•
A
lways operate the power switch by
your hands only.
•
W
hen the power is turned on, the chair
rotation gets locked automatically.
(1) Guiding Customers
1. Rotate the chair so that the customer can be easily seated on the chair.
When the power switch is turned on.
When any of the switches are pressed.
How to Use
•
A
lways be sure to lower the chair to the lowest position and lock the rotation when a
customer is getting in or out of the chair in order to ensure safety.
•
B
e careful of the followings when rotating the chair in order to ensure safety.
L
ower the chair to the lowest position.
Do not rotate the chair until the customer has completely sat down in the chair.
Always be sure that no other persons are in the surrounding area before rotating the
chair, and rotate so that the step and other parts do not contact the customer or any
nearby equipment.
•
A
lways be sure to lock the chair when not rotating it.
•
A
lways operate the power switch by your hands only.
•
W
hen the power is turned on, the chair rotation gets locked automatically.
WARNING
12
Rotation lock switch
Left
Right
<Foot Control>
<Control Panel>
Backrest
Armrest
Rotation lock switch
CAUTION
1 Release the base rotation with the rotation lock
switch.
Pressing the rotation lock switch either at the foot control or the
control panel releases the base rotation. (Operation is the same
on either side.) Chair rotation is locked by hydraulic system. Each
press of the rotation lock switch alternately locks and releases
the base rotation.
2 Rotate the chair.
Hold the backrest or armrests when rotating the chair.
The chair is 360 degrees rotatable.
3 Fix the chair in a work position.
Stop the chair at the desired work position and press the rotation
lock switch either at the foot control or the control panel. The
chair is locked and prevented from rotating.
⇒
When the chair rotation lock is released, the chair rotation gets
locked automatically in the following cases.
If the power is turned off, chair rotation gets locked automatically
when the power is turned on.
Chair rotation gets locked automatically if any of the switches at
the foot control or the control panel is pressed.
