2. Lowering the child seat
Press the child seat Down switch on the armrest control panel. While it is pressed, the child seat will lower and a
warning beeper will sound.
⇒
If the chair rotation lock is released, the chair rotation gets locked automatically when you press the switch.
CAUTION
How to Use
17
This chair is equipped with a child seat that is able to be individually raised and lowered.
1. Raising the child seat
Press the child seat Up switch on the armrest control panel. The child seat will rise up while it is being pressed.
⇒
If the chair rotation lock is released, the chair rotation gets locked automatically when you press the switch.
(4) Using the Child Seat Function
Child seat Up switch
Child seat Down switch
AB-HPPXN
Synchronized legrest type
AB-HPBXN
Fixed legrest type
Child seat
Child seat
AB-HPBXN
Fixed legrest type
AB-HPPXN
Synchronized legrest type
Child seat
Child seat
The child seat is not able to be raised while the backrest is reclined by a large amount (approx 10° or more) to
prevent falling over or dropping accidents.
Please return the backrest to the fully upright position before raising the child seat.
•
D
o not raise or lower the child seat while a child is seated. Only allow a child to sit down
after setting the chair to an appropriate position.
If the child seat is raised or lowered while a child is seated, it may result in injury due to
the child falling down or pinching body parts in the child seat gap.
•
B
efore raising or lowering the child seat, always confirm that the child has not placed
any body part below the seat, or in the gap between the seat and the armrest.
•
T
he child seat has been designed to withstand a maximum load of 500 N (50 kgf/110
lbf).
CAUTION
How to Use
18
Child seat
Seat
＜
Emergency Rise Function
＞
If an object or a body part such as a hand or leg is pinched between the child seat and the seat (shaded section of
the following diagram) during child seat lowering, this function slightly raises the child seat and halts operation.
When the system detects that an object or a body part has become pinched in the shaded area in the diagram, the
child seat down switch is disabled.
The child seat can only be lowered after raising it up and removing the object that is pinched in between.
P
lease pay particular attention to avoid operating the child seat while objects or body
parts such as fingers are present in the locations indicated by the dotted lines in the
diagram below.
•
G
ap between the child seat, backrest, armrest, and
seat.
•
T
he rear of the child seat.
