Takagi T-KJr, Инструкция по установке и руководство пользователя

Страница: 23 / 27

22
2. TK-TV01 Vent Terminator
This terminator can be used where a T-KJr. is
going to be vented out through a wall. This is a
CSA approved part of the unit. Connect a
Category III Stainless vent pipe from the top of
the unit to the backside of this terminator to
exhaust flue gases through the wall without a
thimble. Install vent terminator in accordance with
manufacturer’s installation instructions and any
applicable local codes.
4. TK-TV03 Vent Cap
The TK-TV03 Vent Cap is for outdoor installation
with the T-KJr. water heater. The cap is installed
on the top of the unit, instead of connecting an
exhaust vent. The cap will prevent any debris that
might be in the environment from entering the unit
and causing damage or a fire hazard, as well as
preventing rain or other weather from entering the
unit.