Takagi Mobius T-M1, Инструкция по установке и руководство пользователя

Страница: 23 / 34

- 23 -
Optional Items
1. TM-RE10 Temperature Remote Controller
The TM-RE10
Temperature Remote
Controller has two
functions. It allows the
output temperature from
the T-M1 to be adjusted
within the range of 99 °F
to 182 °F, and it also works as a diagnostic tool
that will give a concise error code whenever there
is a problem with the unit. The temperature
options are 99°F, 100°F, 102°F, 104°F, 106°F,
108°F, 109°F, 111°F, 113°F, 115°F, 117°F,
122°F, 131°F, 140°F, 158°F, and 167°F or 182°F.
See the trouble shooting section for information
on possible error codes.
2. TK-TV01 Vent Terminator
This terminator can be used
where a T-M1 is going to be
vented out through a wall. This
is a CSA tested Takagi
component. Connect the
Category III stainless steel vent
pipe from the top of the unit to
the backside of this terminator to exhaust flue
gases through the wall without a thimble. Install
this vent terminator in accordance with Takagi’s
installation instructions and any applicable codes.
3. TK-TV03 Vent Damper
The TK-TV03 Vent
Damper prevents the
backflow of air through
the exhaust vent. This is
a CSA tested Takagi
component. This helps
prevent harmful exhaust
gases from entering the home, as well as helping
to prevent the unit from freezing in areas where
cold air can be blown or drawn into the exhaust
system. Install this vent damper in accordance
with Takagi’s installation instructions, and any
applicable codes.
4. TK-TV06 Vent Cap
The TK-TV06 Vent
Cap is for outdoor
installation with the
T-M1. water heater.
The cap is installed
on the top of the
unit, instead of connecting an exhaust vent pipe.
The cap will prevent any debris that might be in
the environment from entering the unit and
causing damage or a fire hazard, as well as
preventing rain or other weather from entering the
unit.
5. TM-RE20 Multi system controller
The TM-RE20 is for multi
system controller of T-M1.
This can control maximum
20 T-M1, which mean is from
25,000 BTU to 4,700,000
BTU. And it also works as a
diagnostic tool that will give a
concise error code whenever
there is a problem with the
unit. When TM-RE20 is
used, it needs TM-RE10.