![TAKACHIO MPL-H11S Скачать руководство пользователя страница 15](http://html.mh-extra.com/html/takachio/mpl-h11s/mpl-h11s_manual_814296015.webp)
- 15 -
7-1. Direct connection mode
A specific route can be detected in Direct Connection mode. Use two 5m/16.5 ft connecting cable with a
reel provided in the carrying case as one of the standard accessories.
When the clips are connected to the transmitter, Direct Connection mode automatically selected.
Frequency setting
Connect the cable clips to the target line and ground stake.
Display of the Direct mode
Press
FREQUENCY
key
Transmitter
THIS GROOVE UP
Before connecting, pull out proper
length of cable from the reel.
Note: Place the Earth/Ground as far as possible and at right
angle to the object line.
Keep Receiver at least 5m/16ft. away from the signal
connection point as illustrated
Receiver
Press
Frequency
key
Black clip
Ground stake
Red clip
Metal pipe
Note: Clean off if the connected part is rusted or
painted to ensure a good electrical connection.
Check the grounded point. Find the best place to
ground to have a GOOD SIGNAL LOOP
indication.
*Set a receiving frequency on the Receiver the same as
the transmitter.
90
°
5m/16ft or more away