TAJIMA TFHX Series, Руководство пользователя

Страница: 126 / 140

TERMINOLOGY
CURSOR
A mark that indicates the position where character or letter is to be input/displayed on the screen. Some of marks blink or
reverse letter
DATA CONVERSION
To reduce/enlarge, rotate, or reverse the original design data
DATA INPUT
To set design data that corresponds to design to sew
DATA SET
Operation to decide a series of setting contents in data input
DESIGN DATA
Data for embroidering design. It consists of design, stitching mode, etc.
DESIGN INTERVAL
Amount of movement (mm) when one design moves to the next design in repeat embroidery of the same design
DESIGN INTERVAL FUNCTION
Method of movement when one design moves to the next design in repeat embroidery of the same design
DIP SWITCH
A small slide switch to change conditions of machine movements
DSW
The abbreviation of Dual in Package Switch. Refer to the DIP switch.
EMBROIDERY FRAME
A general term of frames that hold material to be embroidered such as cloth, leather, etc.
END CODE
There are the code that indicates the end point of embroidery (end code 2) and the code that indicates the pause in designs
to be repeated (end code 1)
EXCITATION
To generate magnetic power by sending electric current into coil such as electric magnet, etc.
FDD
The abbreviation of Floppy Disk Drive. Refer to floppy disk drive.
FIXED PITCH MOVEMENT
To move the frame right/left direction (X-axis direction) by preset head pitch
FIXED POSITION
It is the regular stop position, and is indicated by angle of the main shaft of the machine
FLOPPY DISK
An external memory device of which round shaped polyester surface is pasted with magnetic powder. It is used for storing
design data, etc.
FLOPPY DISK DRIVE
A device to write or read data or program of floppy disk
FRAME
Refer to embroidery frame
(FD11)