TAJIMA TCMX 601, Руководство пользователя

Страница: 68 / 130

Design data, memory processing
7-3
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
2.
Cleanup
Remove a fine stitch in the design data that is stored in the memory,
and make the next stitch data absorb the removed data.
1.
To call the screen......................................................
2.
To set ........................................................................
1.
To select design data
Pressing the confirmation mode key ( ) will display
the contents of the design being selected (p.6-2). To
return to the original screen, press the reset key (
).
2.
Set
A stitch length to clean up (mm)
3.
Selection of stitch length to clean up
In this example, stitches of 0.6 mm or less are targets to
clean up.
4.
Set
Removed Stitches
In this example, the number of stitches of 0.6 mm or
less is 35.
CAUTION
This operation will overwrite the original design data by
design data after cleanup. Therefore, store the original
design data into a floppy disk or memory card
according to need (p.7-9, p.7-12)
It is not possible to set cleanup in the middle of embroi-
dery.
!
Cursor
In case of red characters: data set design
2 Cleanup
List screen List screen
Press
2 Cleanup
or
G006.DST
Coaster
5433
G006.DST
Coaster
5433
0.4
The current setting value
Example: 0.6 (mm)
0.6
0.6
35
JZ07