Taizhou Tianchen Intelligence & Electrics TC-G158 with lead-acid, Руководство пользователя

Страница: 9 / 22

-
P14
- -
P13
-
3. INSTALLATION
3. Installation
This chapter describes how you install this mower. Before starting the
installation read the previous chapter 2. Presentation.
Read the whole of this chapter too before starting the installation. How
the installation is made also affects how well the mower will work. It is
therefore important to plan the installation carefully.
3.1 Preparations
Training
- Read the instructions carefully. Be familiar with the controls and the
proper use of the appliance.
- Never allow people unfamiliar with these instructions or children to use
the appliance. Local regulations may restrict the age of the operator.
- The operator or user is responsible for accidents or hazards occurring
to other people or their property.
3.2 Hardware adjustments
Blade adjustment
The mowing system used by this mower is based on an effective and
energy efficient principle. Unlike normal lawn mowers, the mower cuts the
grass instead of striking it off.
We recommend you allow the mower to mainly mow in dry wether to
obtain the best possible result.
The blades must be in good condition to obtain the best mowing result. In
order to keep the blade sharp for as long as possible it is important to
keep the lawn free from branches, small stones and other objects
(especially the objects less than 6.5cm height).
How to adjust the cutting height:
- The cutting height can be varied for
3cm and 4cm. (Factory setting of
blades is 3cm)
If the grass is long, it is appropriate
to let the mower start mowing at 4cm.
Once the grass is shorter. you
can change it lower with 3cm.
- To adjust the cutting height:
1. Stop the mower and take off the
key.
2. Turn over the mower to underside.
It’s easy to find that there are two
blades fix on the blades holder.
Swing the 4 screws on blades
holder. And take blades out.
3. There are two kinds of blades.
3cm blades and 4cm blades.
4. Choose your cutting height (3cm or
4cm), and then fix the two blades
with screws.
5. Turn over the mower to upside.
Cutting height adjustment finished.
3C
M
Cutting height explanation:
For example the cutting height
is in 3cm level.
Grass
Height
Cutting height: 3cm
3. INSTALLATION
Level 4cm
Level 3cm
Blade holder