Taizhou Tianchen Intelligence & Electrics TC-G158 with lead-acid, Руководство пользователя

Страница: 19 / 22

After turn on the
mower by key and set
operate patten, but
the mower still can
not start. And the
charging station is
beeping.
After turn on the
mower by key and
set operate patten,
but the mower still
can not start No power to plug
receptacle or main
power is shut off.
Bad
communication
between charging
station and mower
Check the power and
check the plug.
Connect charging
station with power
supplier.
1. The virtual wire
fails to send
signals.
2. The virtual is
broken
1.Check the virtual wire
light (colorless). Be sure
the virtual wire is
connected to the
charging station that is
motion, and there is no
loose place.
2. Connect the wire with
virtual wire connectors.
7. TROUBLE SHOOTING
7. Trouble shooting
-
P34
-
Problem Solutions
Possible reasons
-
P33
-
Mower stop working
and beeping.
Mower is lifted over
2CM from the
ground. Put the mower in lever
ground, turn off the
mower and restart it.
Remote control does
not work
The electricity power
is low
Change batteries
Mower stop working
and beeping.
Mower stop working
and beeping.
Mower is tilted over
than 30 degree from
the ground Put the mower in lever
ground, turn off the
mower and restart it by
enter password and
choose operate pattern.
1. Cutting height too
low.
2. Blade or running
wheels strike hard
objects.
3. The mower is
trapped in lawn.
1. Adjust the cutting
height to suitable height.
2. Clean the grass and
make sure it is free from
hard objects.
3. Clear the lawn where
the mower is trapped or
restart the mower in
another place.
7. TROUBLE SHOOTING
Problem Solutions
Possible reasons
Mower stop working
and beeping.
1. Strike bump
sensors times
continuously.
2.Bump sensors are
locked.
3.Wires of bump
sensors have be cut
off. Bump sensor is
broken.
8
1. Restart the mower
2. Free bump sensors
3. Change new wires of
bump sensors. Send the
mower to provider and
change the bumper
sensors.