background image

-

P28

-

-

P27

-

5.3 Stopping mower /Turn off mower

1. 

Press

 

power

 

button

 

from

 

remote

 

control

.

  

Mower stops, the blade motor stops.

 

   mower goes into taskstate.

2. The appliance also can be turned off by
    press emergency switch directly.

3. Turn off the mower by  anti-clockwise 
     the key switch.       

5.4 Emergency Switch

Press emergency switch at any time the 
mower power off at once. User has to 
restart the appliance.

5

USE

5

USE

5.5 Recharging

Steps as follow:

 
1. Turn off the mower by key.

 2. Insert charger and screw the 
     Knob.
 

 3. 

 4. Connect the charger to power 
     supplier. 

Connect the charger to power 

     supplier. 

Recharge Voltage:24V (Lead-acid battery) / 29.4V(Lithium battery) 
Recharge current: 2A

The charger is not water-proof therefore it must be located on 
a place which is dry and ventilated.

WARNIN

- The mower could goes back to recharging automatically if it is power
   less. Or press the Home button from remote control, the mower also
   could goes  back to station for recharge.

- The mower also can  recharges  by charger directly.

Содержание TC-G158 with lead-acid























Отзывы: