Taizhou Tianchen Intelligence & Electrics E1800, Руководство пользователя

Страница: 16 / 23

- 14 -
6.APP USER MANUAL
2-1Area 1 is non-optional,selects by default.
2-2After select Area, the symbol
* will be in red color.
2-3 Start locating to set memory
point.
A memory point is to program the
where to leave virtual wire and
go inner lawn.Each area needs
a memory point.
Pls make sure the mower voltage
more than 27V before setting the
memory points,and pls put the
mower at charging station before
locating.
-It is best to set the memory point
in the middle of two corners.
--A better position of memory point is 3meter distance
from the beginning or the end of an area.
-Route the wire around the passage to separate the
the area.The virtual wire to and from the edge of
passage is 1meter at least.pls refer to below picture.
-A minimum distance between the virtual wire which
is to make passage is 50cm.
2.2 choose the areas that you set accordingly:
3.Area working-time setting
3.1.The Area working-time setting should be used
together with Area
location setting.
3.2.Choose the mower
working day per week.
3.3Set the start time,
then set the working
time for each area
and Send.
-Pls note if the working
areas are for example
3areas,do not set the
time for other
unselected areas.
-If set Area 1 with 0min,
it means Non-cutting in
Area 1.
-If unselect working in
Area 2,even has set
working time in Area 3,
mower will not work in
Area 3.
3.4.Edge mowing:
ON:every time mower
will cross to the back
of station to mow the
edge grass on virtual
wire and follow the wire
back to station first.
4.Put the mower back to station and wait for working.