background image

5. Use

5. USE

IMPORTANT INFORMATION

- Do not leave the mower to operate unattended if you

  

are pets,

 

children or people in the 

 know that there 

-  Mow only in daylight or in good artificial light.

-  Avoid operating the mower in wet grass.
-  Do not operate the mower when barefoot or wearing 

-  Always wear

 

substantial footwear and long trousers.

-  Always be sure of your footing on slopes.

-  Use extreme caution when reversing the mower  

-  Always switch on the mower according to instructions

   

away from the

 

blade.

 with feet well 

5.1 Preparation

-  Ensure the correct installation of the virtual wire. 

-  Periodically

 

inspect

 

the

 

area

 

where

 

the mower

 

 

and

 

remove

 

all

 

stones

sticks, wires, 

is

 

to

 

be

 

used 

   

 objects

 

especially

 

the height

bones, and other foreign

-  Periodically visually

 

inspect that

 

the

 

blades, blade

   

cutter assembly

 

are not worn or damaged. 

 

bolts and 

Read the safety instructions before you start

Keep your hands and feet away from the 
rotating  blade. Never put your hands or feet 
close to or under the body when the

 

motors

WARNING

WARNING

  vicinity

 

   open sandals.      

   towards you.

your mower.

are

 

running

.

   of objects is

 

less

 

than

 

6cm.

   

Replace worn or damaged blades and bolts in sets to

 

-  Connect the two ends of virtual wire to the  terminal 
   on charging 

virtual wire is in good

station, and ensure 

  

 

colorless).

 connecting. (Light on charging station is in 

-  Insert charger into charging station and secure it with

   

charger to power 

 threaded cap. And then connect 

   

connection

supply. Ensure the charging station has a good 

5.2 Starting the mower

   preserve balance.

IMPORTANT INFORMATION

 

charging station is Green

.

 

and the light on 

-  Periodically

 

inspect

 

the

 

lawn

 

is

 

without

 

any

 

small

 

  

hole

 

or

 

mound

.

User

 

can

 

not

 

start

 

the

 

mower

 

if

 

virtual

 

wire

 

or

 

charging

 

station

 

is not

 

in

 

good connection

There are two locations of start the mower.
1.Take the mower clockwise onto virtual wire, make sure

that the mower is not connected with two charging 

sheets on charging station. Otherwise, the mower is in 

recharging Mode, it can not be started.  

2.Take the robot to start point. 

5.3 Stopping mower /Turning off mower

1. Press stop

 

button

 

from

 

APP. Mower 

  

stops and enters standby mode.

 

2. The mower can be turned off by pressing the
    Emergency button directly.
3. Press power button under 

 to turn off.

 

the mower

5.4 Emergency Switch

Press Emergency button at any time the mower power 
off at once. User has to restart it. 

   If set 

   If set 

 

 off, the robot begins cutting inside 

mowing

Edge 

E

Ed

dg

ge

e  m

mo

ow

wiin

ng

   lawn directly.  

- 11 -

on, the robot will follow the virtual wire 

cutting for one circle, and back to station first.

   Turn on the Power button under the mower.

To start the robot.

2.Press the Emergency button 

      

to turn on the robot.

      

3. Select AUTO         mode, the mower starts working.

1.

   

If the mower lost contact with station, AUTO or 

Note:

   HOME mode is not able to start.The signal light

A

   is always flickering,then need rematch the mower with 

   charging station,pls refer to 

4.5

Match  mower with charging

   

 station.

Содержание E1800
























Отзывы: