Taiwei TW-510A, Руководство пользователя

Страница: 4 / 19

1. General
1.1 Usage:
The TW-10/16A/B/C series Rocker Hydraulic Pressure Cutting Machine is qualitatively
designed and manufactured based on more than ten years of experiences in production of
cutting machine and combined with the loud noise and poor safety properties of
small-tonnage mechanical cutting machine. It is a substitute for small-tonnage mechanical
cutting machine.
This cutting machine is mainly used in different industries to cut various soft materials, e.g.
leather, plastic, canvas, nylon, cardboard, etc., with knife die.
1.2 Characteristics:
1.) The cutting forces are 100KN and 160KN. The rocker arm width is 330mm.
2.) This machine is equipped with automatic lubricant system which can lessen wearing and
prolong the service life.
3.) The electronic delay circuit is adopted to control the low limit position of stroke, providing
higher precision and cutting quality. The hand wheel can be used adjust the height of
working table of rocker arm distance, featuring more simple, reliable and convenient.
4.) Main key parts: both the main post and the piston of oil cylinder adopt high quality steel.
5.) The inertia of flywheel can realize instantaneous cutting with low energy consumption.
6.) Type A adopts gear pump, and Type B adopts vane pump. Type C is made in Italian, with
selectable controls of pressure and time.
2. Main technical parameters
1.1 The maximum cutting force 100KN/120KN 160KN
1.2 The width of cutting pressure 330mm 330mm
1.3 Workbench dimension 420*750mm 420*900mm
1.4 Effective travel 50-140mm 5-140mm
1.5 Motor power 1.5HP 1.5HP
1.6 Overall dimension (length*width*height) 700*750*1350mm 720*900*1350mm
1.7 Hydraulic oil amount 45L 45L
1.8 Net weight 430kg 500kg
1.9 Gross weight 450kg 520kg
3