Tait TP9310 Скачать руководство пользователя страница 18 | Manualshive

Страница: 18 / 80

Tait TP9310 Скачать руководство пользователя страница 18

18 About this guide

1

About this guide

This user’s guide provides information about the
TP9310 DMR portable radio.

The radio behavior described in this guide applies to
radios with firmware version 2.15. If your radio does
not operate as you expect, contact your radio provider
for assistance.

Safety warnings used in this

guide

Please follow exactly any instruction that appears in
the text as an ‘alert’. An alert provides necessary
safety information as well as instruction in the proper
use of the product. This user’s guide uses the
following types of alert:

Warning

This alert is used when there is a hazardous

situation which, if not avoided, could result in death or
serious injury.

Caution

This alert is used when there is a hazardous

situation which, if not avoided, could result in minor or
moderate injury.

Notice

This alert is used to highlight information that

is required to ensure procedures are performed
correctly. Incorrectly performed procedures could
result in equipment damage or malfunction.

This icon is used to draw your attention to
information that may improve your
understanding of the equipment or procedure.

«
...
16
17
18
19
20
...
»

Содержание TP9310

















































































Отзывы:

Нет отзывов