Tait TP9310 Скачать руководство пользователя страница 14 | Manualshive

Страница: 14 / 80

Tait TP9310 Скачать руководство пользователя страница 14

14 For your safety

If there is interference between your hearing aid and
the radio, please discuss an alternative solution with
the hearing aid manufacturer.

Potentially explosive atmospheres and

blasting areas

Warning

Unless the radio is specifically certified for

use in a potentially explosive atmosphere, turn off the
radio before entering such an atmosphere. An
explosion could cause serious injury or death.
Examples of potentially explosive atmospheres
include filling stations, and any environment where
there are flammable liquids, gases, or dusts.

Warning

Turn off the radio before approaching

blasting caps, a blasting area, or any area where you
are instructed to turn off a two-way radio. Obey all
signs and instructions. Interference with blasting
operations could cause serious injury or death.

Radio installation and operation in

vehicles

Warning

Keep the radio away from airbags and

airbag deployment areas. Do not install, charge, or
place a radio near such areas. An activated airbag
can propel a portable radio with sufficient force to
cause serious injury to vehicle occupants. An airbag
may not perform to specification if obstructed by a
radio.

Warning

To avoid damage to existing wiring, airbags,

fuel tanks, fuel and brake lines, or battery cables, refer
to the installation guide for the radio, and to the vehicle
manufacturer’s manual, before installing electronic
equipment in the vehicle.

Using a handheld microphone or a radio while driving
a vehicle may violate the laws and legislation that
apply in your country or state. Please check the
vehicle regulations in your area.

«
...
12
13
14
15
16
...
»

Содержание TP9310

















































































Отзывы:

Нет отзывов