Tait TP9310 Скачать руководство пользователя страница 12 | Manualshive

Страница: 12 / 80

Tait TP9310 Скачать руководство пользователя страница 12

12 For your safety

Frequency band reserved for

distress beacons

Frequency band 406 to 406.1 MHz is reserved for use
by distress beacons. Transmissions should not be
made within this frequency band.

Health, safety and electromagnetic

compatibility in Europe

In the European Community, radio and
telecommunications equipment is regulated by
Directive 1999/5/EC, also known as the Radio and
Telecommunications Terminal Equipment (R&TTE)
directive. The requirements of this directive include
protection of health and safety of users, as well as
electromagnetic compatibility.

Intended purpose of product

This product is an FM radio transceiver. It is intended
for radiocommunication in the Private Mobile Radio
(PMR) or Public Access Mobile Radio (PAMR)
services, to be used in all member states of the
European Union (EU) and states within the European
Economic Area (EEA).

Restrictions

This product can be programmed to transmit on
frequencies that are not harmonized throughout the
EU/EEA, and will require a licence to operate in each
member state.

This product can be programmed for frequencies or
emissions that may make its use illegal. Where
applicable, a license must be obtained before this
product is used. All license requirements must be
observed. Limitations may apply to transmitter power,
operating frequency, channel spacing, and emission.

«
...
10
11
12
13
14
...
»

Содержание TP9310

















































































Отзывы:

Нет отзывов