Tait T809-10, Руководство по обслуживанию

Страница: 24 / 42

24 Installation Guidelines
MBZ-00001-01
November 2004 Copyright © 2004 Tait Electronics Ltd
3.3.1 DC Output Terminal Block
The DC Output Terminal block on the rear of the T809-10 is a Phoenix Contact HDFKV
10. This is a screw-type terminal connector that uses a cage mechanism to clamp the
conductor(s).
When installing:
• Use a stripping length of 11mm.
• Do not twist the strands of the conductor prior to clamping.
• Securely fasten the conductor(s) with a tightening torque of 1.5Nm (recom-
mended minimum).
• Observe maximum wire cross-sections as outlined in the table below.
3.3.2 Auxiliary Inputs Connector
The 9-way D-range connector on the T809-10 rear panel (auxiliary inputs) provides
access to the remote control and remote sense functions of the power supply. For con-
nection details, refer to Sections 3.5 (Remote Sense) and 3.6 (Remote Control).
Conductor Type Number of
Conductors
Maximum Cross-section
Flexible (stranded) 1
10mm
2
(AWG = 6)
2
†
† These conductors use the same cross-section
4mm
2
(each)
Solid 1
16mm
2
2
† 4mm (each)
Flexible with ferrule and
plastic sleeve 1
10mm
2
2
†
2.5mm
2
Flexible with ferrule
without plastic sleeve 1
10mm
2
Flexible with twin ferrule
and plastic sleeve 2
6mm
2