Tainet VENUS 2916, Руководство пользователя

Страница: 92 / 225

Chapter 3 Configuration and Management
76
Port
Backup registrar service port number.
Registration Time 3600(Default)
Defines the time (in seconds) for which registration to a
Proxy server is valid. The value is used in the header
„Expires„. If Registrar server return new expires parameter
in response, the gateway resumes registration according
to the new parameter.
Re-registration
Timing (%) 100(Default)
Defines the re-registration timing (in percentage). The
timing is a percentage of the re-register timing set by the
Registration server.
The valid range is 50 to 100. The default value is 100.
For example: If 70 (%) is used and Registration Expires
time is 3600, the gateway resends its registration request
after 3600 x 70% = 2520 sec.
Outbound Proxy
address Quick Start parameter
IP address or domain name of the outbound proxy server.
Outbound Proxy
Port Quick Start parameter
Outbound proxy service port number.
Transport way Quick Start parameter
Transport protocol and valid options include:
AOR name If AOR name is specified, REGISTER message will use
this parameter in From/To URI. Otherwise, it will use the
same value of Request URI.
Keep Alive mode 1. Disable (default).
2. Enable Keep alive with Proxy using OPTIONS.
3. Enable Keep alive with Proxy using REGISTER.
Any response from the Proxy, either success (200 OK) or
failure (4xx response) is considered as if the Proxy is
correctly communicating.
Note 1: This parameter must be set to 2(OPTIONS) when
Proxy redundancy is used.
Note 2: When the active proxy does not respond to
INVITE messages sent by the gateway, the proxy is
marked as inactive. The behavior is similar to a
Keep-Alive (OPTIONS or REGISTER)
Keep Alive
interval 60(Default)
Defines the Proxy keep-alive time interval (in seconds)
between Keep-Alive messages.
If the configuration is finished, click
“OK” button bellow the web page to confirm
changes or click
“Cancel” button to deny it.