TAIKO Audio Extreme, Руководство пользователя

Страница: 8 / 24

5.4 Connecting the server
To connect the server, do the following:
1. Connect the power cable to the power port (10).
2. Connect the other end of the power cable to a suitable power source (100 – 250 VAC).
Tip To ensure the best audio quality we recommend to use a copper network connection.
3. Connect the network cable to your home network.
4. When using a copper network cable, connect the cable to the LAN port (3) labelled LAN 1 .
When using a fiber network cable, connect the cable to the fiber network port (6).
Tip To ensure the best audio quality we recommend to keep the USB cable length under 2 meter.
5. Connect the USB cable to your DAC.
6. Connect the other end of the USB cable to the DAC port (2).
The server is now connected to all necessary equipment.
5.5 Powering the server
The server is equipped with a power switch at the rear side, and a front panel button. Use the power
switch when the server is not used for a longer period of time. In other cases, use the front panel
button.
5.5.1 Switching on the server
To switch on the server, do the following:
1. Switch the main power switch (8) to the ON position.
2. Press the front panel button (1). The button lights up.
After 25 seconds the server beeps twice and is ready for use.
Caution! The server should be completely silent during operation. If there is any audible noise,
switch off the server, and try to find the cause.
5.5.2 Switching off the server
To switch off the server, do the following:
1. Double press the front panel button (1). The button light switches off after 5 seconds.
Caution! Only use the main power switch after you have correctly switched off the server and
the button light is off.
2. To completely power off the server to cold state, switch the main power switch (8) to the
OFF position.
The server is now switched off.