Taifun® GT III – User Manual
english
19
Coil example
Viewed from above, the winding
should now be uniformly and
centrally aligned, covering the air
hole.
Now a broad strand cotton is needed. The cotton is tipped on one side and
passed through the coil.
The cotton can then be shortened. On
each side should be about 8-10 mm
cotton.
One end of the cotton is now
carefully guided into the side
pockets.
On the other side, too.
The cotton should fill the pockets
completely, but it must not be
stuffed. The cotton wool must be
distributed loosely and airily.
It is important that there is some
cotton behind each liquid opening.
IMPORTANT
After applying a coil, the cotton must be pre-moistened with liquid
before the atomizer is screwed together and the tank is filled.
The winding shown here is only an example. Other wires, a different number of turns, and larger /
smaller diameters are also possible.
