Taifun® GT III – User Manual
english
15
Taifun® GT III assembly
Pic 13:
The parts 9, 10, 11 as well as 15 and
16 are now required.
Pic 14:
First, put the O-ring [15] in the
recess on the deck [16].
Pic 15:
The O-ring [15] must be positioned
exactly at the intended location on the deck
[16].
Pic 16:
Now insert the positive pole
insulator [9] into the hole provided in the
deck [16].
Pic 17:
It is important to insert the insulator
[9] carefully, evenly and, if necessary, with
slight turning movements.
Pic 18:
The isolator [9] must be fully seated
in the deck [16].
Pic 19:
The negative pole screw [10] is
inserted through the negative pole holder
[11] …
Pic 20
: … and then screwed to the deck
[16].
Pic 21:
When the screw [10] is correctly
seated, only the screw head looks out of the
deck [16].
Pic 22:
The positive pole base [3] is inserted
from below into the deck [16]. The spacers
are then positioned exactly in the recesses.
Pic 23:
The positive pole [4] is now at the
same level as the negative pole [10].
Pic 24:
The O-ring [14] is now installed on
the base [13].
Pic 25:
The O-ring [14] should sit flush in
the recess of the base [13].
Pic 26:
The AFC ring [12] is placed on the
base [13] and held there by the O-ring
[14].
Pic 27:
The AFC ring [12] can now be
moved laterally on the base [13].
Pic 28:
The deck [16] can now be inserted
into the base [13].