english
Taifun® GT III – User Manual
16
Taifun® GT III assembly
Pic 29:
The deck [16] and the base [13] are now
screwed together.
Pic 30:
Now the base should look like this.
Pic 31:
The two O-rings [23] are installed in
the recesses at the upper end of the
chimney [22].
Pic 32:
The O-rings [23] should now be
seated, as on this pic..
Pic 33:
The O-ring [21] is now attached to
the tank ring [20].
Pic 34:
For this purpose there is a fine edge
on the tank ring [20] in which the O-ring
[21] should be seated.
Pic 35:
The O-ring [17] is now inserted into
the tank cover [18].
Pic 36:
The O-ring [17] is located in a small
groove in the tank cover [18].
Pic 37:
The glass tank [19] is now pushed
into the tank cover [18].
Pic 38:
The glass tank [19] sits on the O-ring
[17] in the tank cover [18]. Check the
correct seat again if necessary.
Pic 39:
The tank ring [20] is now placed on
the tank cover [18] …
Pic 40:
... and screwed on there. If
necessary, use pointed pliers to grasp the
filling openings.
Pic 41:
The tank ring [20] should now sit
correctly on the tank cover [18].
Pic 42:
Now insert the chimney [22] into
the tank ring [20] through the tank cover
[18].
IMPORTANT: The O-rings on the chimney
should be moistened with some liquid
before this step.
Pic 43:
The chimney [22] should now be
inserted into the tank [18].
Pic 44:
On the top you can see the
chinmey [22] sitting in the tank ring [20].
