TaiDoc L1, Руководство пользователя

Страница: 17 / 31

10
TESTING WITH BLOOD SAMPLE
Warning:
To reduce the chance of infection:

Never share a lancet or the lancing device.
 Always use a new, sterile lancet. Lancets are for single use only.
 Avoid getting hand lotion, oils, dirt, or debris in or on the lancets and the
lancing device.
Preparing the Lancing Device for Blood Testing
Please follow the instructions in the lancing device insert for
collecting a blood sample.
Preparing the Puncture Site
Stimulating blood perfusion by rubbing the puncture site before blood
extraction has a significant influence on the lactate value obtained.
Blood from a site that has not been rubbed exhibits a measurably
different lactate concentration than blood from the finger. When the
puncture site was rubbed prior to blood extraction, the difference was
significantly reduced.
Please follow the suggestions below before obtaining a drop of
blood:
 Wash and dry your hands before starting.
 Select the puncture site either at fingertips.

Rub the puncture site for about 20 seconds before penetration.
 Clean the puncture site using cotton moistened with 70% alcohol
and let it air dry .
 Fingertip testing (i)
Press the lancing device’s tip firmly against the lower side of your
fingertip. Press the release button to prick your finger, then a click
indicates that the puncture is complete.