TaiDoc L1, Руководство пользователя

Страница: 11 / 31

4
Test Strip
Absorbent Hole Confirmation Window
Test Strip Handle Contact Bars
ATTENTION:
The front side of test strip should face up when
inserting test strip.
Test results might be wrong if the contact bar is not fully inserted into the test
slot.
NOTE:
The L1 monitor should only be used with L1 Test Strips. Using other test 
strips with this meter can produce inaccurate results.
SETTING THE METER
Before using your meter for the first time or if you change the meter
battery, you should check and update these settings.
Entering the Setting Mode (a)
Start with the meter off (no test strip inserted). Press M to turn on the
meter. Press ▲ or ▼ to select Setting mode and press M .
1. Setting the date format
Press ▲ or ▼ to select the desired date format ---
month/day/year or day/month/year. Press M .
2. Setting the date
The sequence of the date setting is: YEAR
→
MONTH
→
DAY.
Press ▲ or ▼ until the correct year / month / day appears. Press
M . The meter displays the full date and “Date is set” message.
1 2
3 4