4.5 Operation
The operation of the TES-5630 economical digital infrared
wireless system combo unit will be introduced in detail in
this section.
1. Adjust the master volume
Rotate the Vol. knob on the top of the TES-5630M to
adjust the volume of the loudspeaker, range: -30 dB to 0
dB, step: 1 dB.
2. Adjust the bass/treble
Rotate the Bass/Treble knob on the top of the
TES-5630M to adjust the bass/treble of the Line Out and
loudspeaker, range: -10 dB to 10 dB, step: 1 dB.
3. L
ine in auto fade
Setting the trigger signal sources of LINE IN fade through
different combinations of the two switches. LINE IN
volume will be reduced 18 dB after triggering.
Switch combination
Trigger signal sources
00
Off
01
Low voice
10
High voice
11
IR signal
4. FB (feedback) suppress
Setting a FB suppress level through different
combinations of the two switches.
Switch combination
Trigger signal sources
00
Off
01/10
Low
11
High
5. Power indication
The power indicator indicates the current working status
of TES-5630M.
Indicator status
Working status
Red (on)
No signal locking
Green (on)
Signal locking
Green (flash)
Receiving control command
by pendant microphone
Note:
The master volume is usually adjusted only
during the initial installation.
Note:
The bass/treble is usually adjusted only during
the initial installation.
Note:
The line in auto fade is usually adjusted only
during the initial installation.
The auto fade will be turned off automatically if
it has not received any trigger signal in 2
seconds.
Note:
The FB suppress is set during the initial
installation.
The FB suppress is only available for current
microphone.
35
