2.5.2 Line In Vol.
Adjust the volume of Line In, range: -
∞
(mute), -30 dB to
0 dB.
1. Press the knob to enter the line in selection interface;
2. Rotate the knob to select between Line in 1 and Line in
2, and then press the knob to enter;
3. Rotate the knob to adjust the volume and then press
the knob to confirm.
2.5.3 EQ Setting
Set up the EQ of Line Out and speaker.
1. Press the knob to enter and select bass or treble;
Bass Treble
2. Press the knob to enter the sensitivity adjusting
interface, the hollow pellet will turn solid;
3. Rotate the knob to adjust the EQ, range: -10 dB to +10
dB;
4. Press the knob to confirm after adjusting.
2.5.4 Auto Fade
Select the trigger signal sources of LINE IN fade. LINE IN
volume will be reduced 18 dB after triggering.
1. Press the knob to enter the setting interface;
2. Rotate the knob to select a fade way among Off, Low
Voice, High Voice and IR Signal.
Voice trigger:
LINE IN audio fade will be trigger
when voice reaches the certain sound pressure. It
includes Low Voice and High Voice.
IR signal:
LINE IN audio fade will be controlled by
microphone on/off.
3. Press the knob to confirm after adjusting.
2.5.5 FB Suppress
Set a FB (feedback) suppress level.
1. Press the knob to enter the setting interface;
2. Rotate the knob to select a level among Off, High and
Low.
3. Press the knob to confirm after adjusting.
Note:
The higher the FB suppress level, the better the
FB suppress effect. But too high level may have
an impact on the sound quality, so please select
the reasonable FB suppress.
Note:
Auto Fade is invalid for LINE IN 1 if it is used for
microphone input.
13