23
2.6.12 Parameters Backup/Restore
System parameters can be backed up or restored through
the panel USB port. Make sure that the USB disk is
properly connected, otherwise it will prompt “Please insert
the USB disk.”
a). Press the “ / ” button to select “Backup” or
“Restore”;
If “Backup” is selected, system parameters can
be backed up;
If “Restore” is selected, system parameters can
be restored;
b). Press the “MENU” button to confirm and to go to
selected menu item;
c). Return to upper level menu after backup or
recovery.
2.6.13 About
Transmitter firmware information will be displayed,
including: version,
TAIDEN
information and product
series number. Use any button to exit.
2.6.14 Simultaneous Interpretation
In “Simultaneous Interpretation” submenu, the
following parameters need to be setup:
“Select Number Of Channel(s):”
“Select Language For Channel:”
“Select Number Of Booth(s):”
"Set Interlock Mode Between Booths:"
“Select Language Of Output Channel For
Booth:”
Operation steps:
a). Setup the number of interpretation channels
Use the “ / ” button to switch the number of
interpretation channels (press and hold the “ / ”
button will adjust the numeric value quickly);
If “0” is selected, it stands for no SI function, use
the “MENU” button to save and return to the main
menu;
If other values are selected, it stands for the
number of interpretation channels, use the
“MENU” button to go to step b).
b). Setup interpretation language
1).
Setup channel 1 first, use the “ / ” button to
switch between languages;
2).
Use the “MENU” button to confirm the selected
language and go to the next channel;
3)
. Repeat 1) - 2) to set up the language for all
channels, and go to step c);
c). Select number of booths
Use the “ / ” button to switch the number of
interpretation booths. Usually, one language will take
one booth.
If “0” is selected, it stands for no SI function, use
the “MENU” button to save and return to the main
menu;
If other values are selected, it stands for the
