22
a) Press the " / " button to select the LCD display
language;
b) Press the "MENU" button to save and return to
upper level menu.
2.6.8 Network Setting
“Network” includes three submenus:
→
“IP Address”
→
“Subnet Mask”
→
“Gateway”
1) Setting up unique “IP Address” for the
transmitter:
•
Use the “ / ” button to switch between the four
numbers;
•
Use the “MENU” button to edit the selected
number;
•
Use the “ / ” button to decrease/increase the
number (press and hold the " / " button will
adjust the numeric value quickly);
•
Use the “EXIT” to return to the upper level menu.
2) Setting up “Subnet Mask” and “Gateway”:
Same chronological order as for the “IP address” set
up.
2.6.9 Use Testing Audio Signal
The transmitter goes to testing mode and testing tone
will be distributed to all output channels.
Use the “MENU” button or “EXIT” button to stop the
testing mode.
2.6.10 U-disk Function Setting
a) Press the " / " button to select enable U-disk
function or not
；
b) Press the "MENU" button to save and return to
upper level menu.
2.6.11 Machine Rename
Set alias for the HCS-5100M with a maximum length of
16 characters or less. It is convenient to identify them
on the operation of room combiner.
a). Press the “MENU” button to enter the name setting
interface, the cursor blinks under the first character;
b). Press the “ / ” button to move the cursor;
c). Press the “MENU” button to modify the character;
Press the “ ” button to clear all the characters
after the cursor;
press the “ ” button to select the new
characters;
d). Press the “MENU” button to save at each
character;
e). Press the “EXIT” button to return to the upper level
menu after setting finished.
Note
:
“IP address”, “Subnet Mask” and “Gateway”
of the system software should correspond
with the above transmitter settings, else
connection error will occur;
All menu setup except “Network” and “Input
sen.” use the “MENU” button to exit saving
changes, and use “EXIT” to exit discarding
changes.
