Tahoe 8116, Руководство пользователя, Страница: 27 / 36

19
Tahoe 8216 / Tahoe 8116 Remote Power Management System
SNMP host3: <disabled>
Tahoe>
snmp on
– enables SNMP support
snmp off
– disables SNMP support
snmp rdcomm < community >
– sets the read community (the password used to read the
SNMP parameters)
snmp wrcomm < community >
– sets the write community (the password used to write the
SNMP parameters)
snmp host1 < address >
snmp host2 < address >
snmp host3 < address >
– allows the setting of up to 3 addresses, from which SNMP access
will be permitted. Entering 0.0.0.0 allows access from any address, while 255.255.255.255 disa-
bles an entry (entering 255.255.255.255 in all three positions is equal to disabling the SNMP
service)
ssh
Th e ssh command con fi gures the built-in Secure Shell server. Th e server can be enabled or disabled
by entering, respectively:
ssh on
or
ssh off
For the fi rst time when the server is enabled the host key must be generated (this may take several
minutes).
Th e SSH server port may be changed with
ssh port < port >
Th e default port is 21.
Access to the server can be limited by entering:
http host < IP address >