Tahoe 8116, Руководство пользователя

Страница: 19 / 36

11
Tahoe 8216 / Tahoe 8116 Remote Power Management System
off 1:*
- turns o ff all outlets on main unit,
on 5 2:2,3
- turns on fift h outlet on main unit as well as second and third outlets on
second unit.
Th e end command is useful if the service operator appends some text to messages. It preserves from
an error occurrence in such a situation and should be placed a ft er all commands to be executed and
followed by a semicolon or newline. Th e following text is then ignored.
Commands must be separated with a semicolon (’ ; ’) or newline character.
A ft er a message is received, the device replies with a status message of the form:
Tahoe RPMU: < n > of < m > succeeded.
Where n is the number of commands successfully executed and m is the total number of commands
found in the message.
Serial Console
Th e serial console gives access to the command line interface. Use a null modem cable to connect
to the device through the serial console port. Port speed is 9600bps with one stop bit, 8 data bits
and no parity, no fl ow control. See the Command Line Interface section for the list of available com-
mands.
Command Line Interface
Th e Command line interface gives full access to all device settings and is available through telnet
and the SSH connection as well as the serial console port.
Complete command set
?
displays the command list/context sensitive help
arp
ARP table con fi guration
con fi g displays current con fi guration
console
console access settings
eepromdump dumps EEPROM (con fi guration memory) contents
erasecon fi g
erases whole con fi guration
exit closes a connection
gsm
GSM settings
help usage information