Tahoe 8116, Руководство пользователя

Страница: 10 / 36

2
Tahoe 8216 / Tahoe 8116 Remote Power Management System
LAN
Th e Fast Ethernet interface is used to connect the Tahoe 8216 to the Local Area Network (LAN). It
may work at speeds of 10 Mbps (10Base-T) or 100 Mbps (100Base-Tx), in full-duplex or half-duplex
mode. Th e mode of transmission is selected automatically, although a speci fi c setting can be set.
Th e device should be connected to an Ethernet switch or a hub using a straight patch-cord cable or
to a PC, a router or an uplink port in a switch using a crossed-over cable. A ft er connecting the cable
the Link LED should light up.
Status LEDs
Th e following status LEDs are placed on the front panel:
LINK lit when the device is connected to a LAN
LAN Act LAN activity, blinks when data is sent or received
10/100M LAN connection throughput – lit when 100 Mbpsconnection speed is negotiated
GSM GSM status (o ff – GSM disabled, on – not registered to the network,blinking – reg-
istered to the network)
Downlink
Used to connect a Tahoe 8116 Remote Power Management System Extension Unit.
Tahoe 8216/GSM only:
SIM Card
Th e GSM SIM card slot.
RF
Th e GSM antenna Connector (SMA).