5
OPERATION (2/2)
Color Analyzer result
When an analysis has been performed, the results will be
displayed on the left side of the monitor as shown below.
The average color value of the sample is written on the screen
and displayed on the defined color range (top left corner) in
green if within the defined pass limits. Standard deviation is
also counted.
All identified color values within the defined color range is
displayed on a graph. Values within pass limits are displayed
as green, while values close to or within fail limits are displayed
as yellow. Values outside of the fail limit range are displayed
as red.
Previous analyses are displayed on a table for easy
comparison between samples. Clear this table using the Reset
data button (see pt. 16).
Use the Snapshot function on the control box to capture an
image of your analysis result. For more info, read Operation
section in the user guide for your TAGARNO FHD digital
microscope.
