Volume (VOL+/VOL-):
Press and hold these buttons to increase or decrease the
volume. You may also adjust your source (laptop, smartphone, CD player etc.)
volume to increase or decrease the volume of the inTONE 2.1 system.
INPUT/FN:
Short press
this button to choose one of the following sources: AUX/LINE,
Bluetooth
,
USB or SD/MMC (two last only when a USB drive or SD/MMC card are inserted).
USB, SD/MMC Card will be automatically selected as a source after a USB drive or
SD/MMC card is inserted – the priority has a device connected as the last one. When
no files are recorded on USB drive or SD/MMC card “NO-F” info is displayed.
Long press
this button to choose one of the following functions. You can adjust the
function or switch it on/off by using VOL+/VOL- buttons.
BASS (bA):
This is the primary low frequency control which allows for 7dB of boost
or cut at 100Hz.
TREBLE (tr):
This is the primary high frequency control which allows for 7dB of
boost or cut at 10Khz.
BALANCE (b):
Adjust balance of Left and Right satellite.
SUBWOOFER (SU):
This is the primary control of subwoofer level (+/- 7).
LOUDNESS (L):
Use when listening at low volume levels.
EQUALIZER (EO):
5 presets or OFF. When EQ is ON some other functions
can be inactive.
VOLUME(U):
Volume control.
Note: When both the USB drive and SD/MMC cards are removed inTONE 2.1 will
always return to AUX/LINE input.
When a source device is
Bluetooth
; USB drive or SD/MMC card, you can
control connected devices via the top control panel:
Press
PLAY/PAUSE
button to start playback.
To pause playback, press
PLAY/PAUSE.
To resume playback,
press
PLAY/PAUSE
again.
To select the next track, press
NEXT/VOL+
button.
To select the previous track, press
PRE/VOL-
button.
Control Instructions(Top control panel)
7
7
Power on the speakers with the POWER switch on the rear panel.
Select
on your audio source e.g. Smartphone, Laptop, etc.
Press the INPUT till the icon is light and the LED display show”BLUE”.
Search for inTone 2.1 on your audio source e.g. Smartphone, Laptop etc.
After a short time, inTone 2.1 will appear on your audio source screen.
Select “ Pair”.
inTONE 2.1 will now be ready to play your music wirelessly within a range of
approximately 10 meters.
Note: Please refer to your audio source owner`s instruction for details on
adjusting the .
To stop playback stop playback on your connected device or change
INPUT
on inTONE 2.1.
Note: Some of the above functions could be not available for all
Bluetooth
devices,
USB drivers or SD/MMC cards.
Hardwire connection to inTONE 2.1 (AUX/LINE):
inTONE 2.1 has the option to connect an audio source such as CD/MP3/MP4 players,
laptop, smartphone, table PC computer etc., using wired connection. inTONE 2.1
offers LINE IN Stereo RCA as well as 3.5mm Stereo mini jack connection.
Note: Do not use both wired connections at the same time.
8
Bluetooth
Connection
®
®
Bluetooth
®
®
®
®
Bluetooth
