Taga Harmony HTA-2000B, Инструкция по эксплуатации

Страница: 6 / 6

Remote Control Instructions
9
10
Battery Installation
1. Open the cover of the battery compartment.
2. Insert two AAA batteries into the battery compartment. Carefully
follow the polarity diagram inside the battery compartment ( po and negative - symbols ).
3. Replace the cover.
Note:
• Always use AAA batteries and do not use the rechargeable batteries.
• Do not mix new batteries with old batteries or different kinds of batteries.
• If the batteries run out, remove the old batteries and replace them with new ones
within several minutes.
• If the batteries are placed incorrectly, they can cause explosion.
• Remove the batteries if the remote control is not used for a long period of time.
• Do not handle and store the batteries together with metallic tools.
Operating Range
Use the remote control within a range of 7 meters from the amplifier and angles of up to
30 degrees aiming at the remote control sensor.
Note: Exposing the remote control sensor to direct sunlight or strong light may cause
faulty operation.
Remote Control Instructions
Remote Control – Functions
• MUTE - During playback press this button to
stop amplifier audio output (no sound will be audible),
press it again to recover the audio signal output back.
• CD / AUX / OPTICAL / LINE / BT / LINE – Press these
buttons to select the audio source then the corresponding
LED Indicator will light up.
• VOLUME - Press button to decrease volume and
to increase volume level.