Taga Harmony HTA-2000B, Инструкция по эксплуатации

Страница: 5 / 6

Vacuum Tube Amplifier Instructions
Bluetooth®
Bluetooth® Connection
• After the amplifier is switched on - the built-in Bluetooth® receiver is waiting to be paired
with a
Bluetooth®
source.
• Select BT input by rotating the Input selector knob – the BT LED indicator will light up.
• Select
Bluetooth®
on your audio source (smartphone, laptop etc.) and start scanning
for available Bluetooth® devices.
• After a short time “HTA-2000B” will appear on the screen of your audio source. Select “Pair”
on your audio source to connect with the amplifier.
• HTA-2000B will now be ready to play your music wirelessly within a range of approximately
7 meters. Start playback on your audio source.
Note: Please refer to your audio source user instruction for details on operating the
Bluetooth®
.
Operation and names of specific functions can vary on different devices.
Important Notes - Bluetooth® Connection
• As long as the amplifier is not switched off for longer than 10 seconds – the current
Bluetooth® connection is active (even if you change the input). After that time the connection
is lost and you will have to repeat the pairing procedure.
• When you move away from the working range of the HTA-2000B
Bluetooth®
receiver for longer than 60 seconds, the current Bluetooth® connection will be lost and
you will have to repeat pairing procedure. Within 60 seconds the connection can be
automatically reconnected.
• When you want to use another Bluetooth® audio source than currently active,
you have to disconnect the active connection and start the Bluetooth® connection procedure.
Rear panel
10. CD / LINE / AUX Line stereo analog inputs
Connect here analog audio sources using RCA interconnects (CD players, FM/AM tuners,
Satellite tuners etc.).
11. DIMMER Switch
Select ON to switch on the backlight of the vacuum tubes window and OFF to switch it off.
12. SPEAKER (Speakers Output Terminals)
Connect your speakers to these terminals using speaker cables. Pay attention to connecting
the polarity of speakers correctly (RED + with RED +, BLACK - with BLACK -).
Before connecting your speakers make sure that the amplifier is switched off.
Please refer to your speakers’ instruction manual for more information.
WARNING! This amplifier accepts only speakers with impedance from 4 ohm to 8 ohm.
Connecting the speakers outside this range can burn the amplifier - it may void your warranty.
13. AC Input and Fuse
14. OPTICAL / COAXIAL Digital inputs
Connect here digital audio sources (CD/DVD/BluRay players, computers/laptops, video game
consoles etc.) using a digital fiber optic cable (OPTICAL input) or a digital coaxial cable (COAXIAL input).
15. BT (
Bluetooth®
) Antenna input
10. 11. 12. 13. 14. 15.