Chapter 3
SV-2003-X2 Server
Part Number: 1006446
Page 60 of 72
Version 1.0. 10/30/07
3.
Loosen the
thumb screws
on the desired
module to be replaced.
4.
Depress the
module safety latch
and gently pull
the handle as shown in Figure 4-12.
Figure 5-51
Hot-Swap of 2U Server Power Supply Module
5.
Slide the replacement module into the
power
supply
.
6.
Press firmly and evenly on the power module
until you feel the module seat in the back of the
power supply.
5.6 Replacing a Hot-Swap Hard Drive
The system's hard drive Hot-Swap feature
enables you to remove a hard drive without
shutting down the operating system or turning
off the system power. The way in which you
remove a hard drive depends on the
application you are using and whether you are
replacing a drive, adding a new one, or
removing a drive permanently.