6-4
Installing Software Drivers
Other Drivers and Utilities
0VMAKFIL Utility
CAUTION:
Check with your dealer to find out if the Suspend-to-disk file (partition) is
already created. If it is not created and you want to create the Suspend-to-disk file by
yourself, make sure that your hard disk is empty. That is, your hard disk has not been
partitioned by the FDISK program. If any partition exists, you have to use the FDISK
program to delete all partitions before you can use the 0VMAKFIL utility.
The 0VMAKFIL.EXE utility program allows you to create in your hard
disk the Suspend-to-disk file (partition), which is required for the
Suspend-to-disk function of your Tablet PC.
Follow these steps to create the suspend-to-disk partition:
1. Boot your system by CD-ROM.
2. Now you can run the 0VMAKFIL program under the Utility
directory on the CD, following this command syntax:
0VMAKFIL
-P
nn
where
nn
specifies the size (in MB) of the partition.
You can have the size larger than your current system memory size for
future upgrade of your memory. If you do not specify the parameter, the
default size will be your system RAM plus 4 MB. The extra 4 MB is for
the overhead of the program and data held in video memory.
You can clear the contents of the partition using the
0VMAKFIL -C
command. The command is useful only when you are backing up the data
in the hard disk drive.
Содержание MIL-BOOK 10 Series
Страница 52: ...4 4 Expanding Your Computer ...
