22
15. Download a new version of Software and/or language
Program downloads and new releases of HL 940 software are available Free of Charge on our website
www.tagheuer-timing.com
For this operation, you need to have:
•
RS232 cable
•
PC with output RS232 (Sub-D9p)
•
The software « CP540 Firmware.exe »
Procedure
1. Copy the software «CP540 Firmware.exe » onto your hard disk
2. Power the HL 940 with an external power supply (The HL 940 is off).
3. Connect the RS232 cable
4. Run the software « CP540 Firmware.exe »
5. Select the COM Port
6. Select the file: Update (HL940_xxx.dat)
7. Press START on the software.
8. Power ON the HL940 (press the ON button for 5 seconds)
The HL 940 will go into a special mode « Download ».
The LDC back light will be ON, but LCD will be blank.
9. As soon as the upgrade is downloaded into the HL 940, validate the software with OK.
10. Remove the RS232 cable from the HL 940, and switch on the HL 940 again.
11. The new software version will be printed (if the Printer is in ON)
Select Serial Port
Select File Name
