17
9.5. Sound Level and LED brightness (Menu
44
)
You may change the Sound Level (from 0 to 3) and
Digit / Start Light
intensity (from 0 to 10) , as well
as
LED
Seconds Dial
intensity (from 0 to 10)
Select menu
44
Blinking White: Select the sound level (from 0 to 3)
Blinking Blue: Select the
2
Digit
Display
/
LED Start Light
brightness (from 0 to 10)
Blinking Purple: Select the
LED
Seconds Dial
brightness (from 0 to 10)
9.6. RS232 Baud Rate (Menu
45
)
The RS232 port is use mainly for interface to a PC.
By default, the baud rate is set to 38400 dbs to allow the
HL 940 Remote Control
software to access
all the parameters.
For Timing Software, this port is normally set at 9600 bds.
Setting =
0
2400 Bds
Setting =
1
9600 Bds
Setting =
2
9600 Bds with Ctrt Flow
Setting =
3
38400 Bds
Setting =
4
57600 Bds
Flow control:
If any equipment connected to the RS232 port does not allow a flow minimum of 2400 dbs (ex.
Radio transmission), a basic flow control is available.
Once this option is activated, the HL 940 sends the first frame and waits to receive the
characters 0x06 « ACK » before sending the next one.
9.7. AUX1 RS232 (Menu
46
)
The AUX Port may be used as follows:
Setting = 0
Serial Printer (HL 200)
Setting = 1
RS232 at 9600 Bds
Setting = 2
RS232 at 9600 Bds Ctrl Flow
Setting = 3
RS232 at 38400 Bds
9.8. AUX2 RS232 (Menu
47
)
Mainly used for Display communication (HL970)
Setting = 0
HL970/980 (9600 Bds)
This setting is today blocked at 0 and could be not change.
9.9. Display Mode (Menu
48
)
Display mode (refer to the Port AUX2
Setting = 1
Time of the day
Setting = 2
Start Light
Setting = 3
Start SPLIT (bib and count down up to 9 min 59 sec)
Setting = 4
Start PTB (Count down up to 59 min 59 sec)
9.10. Language (Menu
49
)
From this menu, you have the possibility to change the print language.
Several languages are available:
Setting = 0
English
Setting = 1
French
Setting = 2
German
Setting = 3
Italian
