Tadpole M1400, Руководство по началу работы

Страница: 14 / 68

Page 14 Tadpole M1400 Getting Started Guide
Accessing the Tadpole M1400 menu system
Follow these 3 steps to access the Tadpole M1400 menu system.
NOTE:
The MENU key is to the right of the spacebar.
NOTE:
The cursor must be located inside the On Screen Display (OSD) window to enable any of the menu
items to be selected.
It is also possible to move the OSD window by dragging the window to a new position using the
touchpad or an attached USB mouse.
1. Turn on the Tadpole M1400.
2. Press [Menu-M] .
3. The menu will come up in OSD as shown below. To navigate the OSD’s menus use the
[up/down/left/right arrow] to the appropriate menu. When highlighted, press [Enter]
to select.
Figure 2.
Main Menu screen
In addition to accessing the Tadpole M1400’s main menu system (as shown above), the
following OSD menus or system functions can be selected as follows:
[Menu-A] Soft reset of the client firmware. The system will power cycle and restart
[Menu-B] Mini-browser
[Menu-P] Lists configured profiles and enables selection for use
[Menu-M] Main Menu
[Menu-N]
Network information
[Menu-S] Lists Screen Resolution and enables selection for use.
[Menu-V] Version of firmware
[Esc] Exits the previous menu